Wednesday, October 22nd...

Still busy at TDC. The cars just keep rolling in.

These are just a few of the projects that we're working on..

Will brought his EG hatch in for an S2000 gauge cluster install.



Zac handled the wring job and had it running in under an hour. All lights are functional. No "tach only" junk.



Hubert's RSX type S is back under the knife. We installed a Comp Stg 5 clutch a few months back, but it just wasn't enough clutch to hold the power.

Avery has been installing a Comp twin disk clutch rated at 800+ whp



Brandon brought us his EG Sedan with a built single cam. It's in for Injectors, GM 3 bar MAP and some other upgrades. We hope to get it on the dyno today. He's shooting for around 400 whp.

Also in this week, we'll be finishing up Jesus' turbo Prelude, working with Dan's 2008 Civic si with the Greddy turbo kit, and just took in a GT35R 350Z for a clutch, flywheel and tune.

Keep your eyes open for updates.

Wednesday, October 14th...

Pontiac G6 Magnaflow exhaust.



We're swapping the exhaust manifold gasket on this 87' 300zx, and we have Jesus' Honda Prelude in for a turbo kit and clutch install.

Tuning again....

This is Richards EF hatch. We tuned it last Friday.





Were back logged for another week, and we've taken on 4 more cars this week. Never slows down for TDC! Life is good and we're growing daily.

Thursday, October 4th....

Tim's G35 Sedan is finally at TDCfor a 2JZ swap. We started on it today by swapping out the cross member and starting a wire tuck.



And we're also working on our drift S14. It's getting a Vq35de and a Turbonetics 60-1...